Display Rds Information; Adjust Sound; Adjust Volume Level; Adjust Bass Level - Philips DCM3100 User Manual

Display RDS information

RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS radio station,
RDS and the station name are displayed.
1
Tune to an RDS radio station.

Press RDS repeatedly to scroll through
available information:
‡ Station name
‡ Program type such as
(sport),
‡ Text messages
‡ RDS clock
‡ Frequency
Synchronize clock with RDS
You can synchronize system clock with an RDS
radio station.
1
Enable the system to automatically
synchronize clock with an RDS station that
transmits time signals (See "Get started" >
"Set the clock").

Tune to an RDS radio station that
transmits time signals.
» The system reads RDS time
automatically.
Note
‡
The accuracy of the clock depends on the RDS radio
station.
(news),
(pop music)...

8 Adjust sound

The following operations are applicable to all
supported media.

Adjust volume level

‡ On the remote control, press VOL +/-
repeatedly.
‡ On the main unit, rotate VOLUME
clockwise or anti-clockwise.

Adjust bass level

‡ On the remote control, press BASS to
enable bass adjustment, and then press
VOL +/- repeatedly.
‡ On the main unit, rotate BASS clockwise
or anti-clockwise.

Adjust treble level

‡ On the remote control, press TREBLE to
enable treble adjustment, and then press
VOL +/- repeatedly.
‡ On the main unit, rotate TREBLE
clockwise or anti-clockwise.
Use automatic loudness
control
The loudness feature enables the system to
increase the treble and bass sound effect at low
volume automatically (the higher the volume,
the lower the treble and bass increase).
‡ Press LOUDNESS to enable or disable
automatic loudness control.

Mute sound

‡ Press to mute or restore the sound.
EN 19