Trace Function 02 - Nortel Communication Server 1000S Maintenance Manual

Page 44 of 210 Quick reference to PRI operations

Trace function 02

553-3001-517 Standard 2.00
Call trace function 02 provides the information from the active (main) call
register, the incoming call state, and the outgoing call state (if any). Trace
function 02 is intended as a debugging tool for system designers.
The information output by function 02 includes the following:
NODE ORIG,TAND,TERM,TBD
SID xxxx—system identifier
RLS xx xx—release of software, issue number of node
TNS l s c u—TN of the originating set
CREF xxxx—call reference number
Incoming call:
ISTATPM x—incoming state progress mark
ITRKPM x—incoming trunk progress mark
LOC xxxx—call reject software location
Outgoing call:
OSTATPM x—outgoing state progress mark
OTRKPM x—outgoing trunk progress mark
LOC xxxx—call reject software location
Main call register:
Word 0—MainPM/AuxPM
Word 1—CRlink
Word 2—Queue_In
Word 3,4—Son_Types/Processes
Word 5—Aux_CRlink
Word 6—OrigType/TerType
Word 7—TTR_TN
Word 8—OrigTN
Word 9—TerTN
Word 10—CallFwdTN
Word 11—DISA_Call/XFER_indication
Word 12,13—CR_Dialed_DN
Word 14—Digitload/Digitunload
Word 15-20—digits
September 2004