Page 168 of 210
System DTI maintenance tools
553-3001-517
Standard 2.00
2.0 Mb DTI maintenance
Table 48
NTAK10 faceplate LEDs (Part 2 of 2)
LED
State
Off
LBK
On (Yellow)
Off
CC
On (Red)
On (Green)
Flashing
(Green)
Off
The LD 60 tables on page 167 provide DTI and clock controller maintenance
commands.
WARNING
Disable the clock controller before unseating circuit
cards. Otherwise, the system initializes and momentarily
interrupts call processing.
September 2004
Definition
No far-end alarm.
NTAK10 2.0 Mb DTI is in loopback
mode.
NTAK10 2.0 Mb DTI is not in loopback
mode.
The clock controller is switched on and
disabled.
The clock controller is switched on and
either locked to a reference or in free-run
mode.
The clock controller is switched on and
locked onto the primary reference.
The clock controller is switched off.