To Adjust Volume; Call Button - Cobra MicroTALK PR561 BLT Owner's Manual

All manuals and user guides at all-guides.com
Listening for a Response
Release the Talk button to receive incoming
Listening
transmissions. Your microTALK
Standby mode while the Talk or Call buttons are
not pressed.

To Adjust Volume

Press the Volume Up or Volume
Volume Button
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).

Call Button

Press and release the Call button.
Call Button
The other person will hear a three second call tone. This
tone is used only to establish voice communications.
LED/S.O.S. Flashlight
Press and release the LED flashlight button below
LED/S.O.S. Flashlight
the TALK button to use the LED flashlight located at
the bottom of the radio.
To activate S.O.S. function, press and hold the LED
flashlight button to turn on. Press and release to
turn off the flashlight or S.O.S. function.
Auto Squelch/Maximum Range
Your microTALK radio will automatically shut off weak transmissions
®
and unwanted noise due to terrain, conditions or if you've reached your
Maximum Range limit.
You can temporarily turn off auto squelch or turn on maximum range
extender, allowing all signals to be received and extending the maximum
range of your radio.
To temporarily turn off auto squelch:
Max Range Hi/Lo
– Press and hold the Max Range Hi/Lo button
4
See page 12 on how to select between ten
call tone settings.
for at least five seconds until you hear
a beep which indicates the maximum
range extender is on.
•
radio is always in
®
•
•
•
•