Cobra MicroTALK PR561 BLT Owner's Manual page 16

All manuals and user guides at all-guides.com
Ten Call Tone Settings
You can choose between ten different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
Mode/Power
1. Press the Mode/Power button until the
Call Tone Setting
2. Press the Channel Up or Channel Down button
3. Choose one of the following:
Channel Button
VibrAlert and Call Alert
®
Your MicroTALK
signals by sounding an audible call tone or an
Call Tone On/
Vibrate On
audible tone with VibrAlert
To change call settings:
1. Press the Mode button until the Call Setting
Call Tone On/
2. Press the Channel Up or Channel Down button to
Vibrate Off
3. Choose one of the following:
12
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
to hear the other call tone settings.
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
® radio can alert you to incoming
icon flashes on the display. The current setting
("01" vibrate + ring, "02" ring only) is displayed.
change the call setting.
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
® .
•
•