Listening for a Response
Listening
To Adjust Volume
Volume Button
Call Button
Call Button
LED/S.O.S. Flashlight
LED/S.O.S. Flashlight
Auto Squelch/Maximum Range
Your microTALK
and unwanted noise due to terrain, conditions or if you've reached your
Maximum Range limit.
You can temporarily turn off auto squelch or turn on maximum range
extender, allowing all signals to be received and extending the maximum
range of your radio.
Max Range Hi/Lo
4
Release the Talk button to receive incoming
transmissions. Your microTALK
Standby mode while the Talk or Call buttons are
not pressed.
Press the Volume Up or Volume
Down button.
A double beep sound is used to indicate
the minimum and maximum volume levels
(1 through 8).
Press and release the Call button.
The other person will hear a three second call tone. This
tone is used only to establish voice communications.
See page 12 on how to select between ten
call tone settings.
Press and release the LED flashlight button below
the TALK button to use the LED flashlight located at
the bottom of the radio.
To activate S.O.S. function, press and hold the LED
flashlight button to turn on. Press and release to
turn off the flashlight or S.O.S. function.
radio will automatically shut off weak transmissions
®
To temporarily turn off auto squelch:
– Press and hold the Max Range Hi/Lo button
for at least five seconds until you hear
a beep which indicates the maximum
range extender is on.
radio is always in
®
•
•
•
•
•