All manuals and user guides at all-guides.com
Memory Scan
Your microTALK
radio can automatically scan the stored memory
®
locations.(See page 10 for setting memory locations)
MEM/ESC Button
To scan memory locations:
1. Make sure 2 or more memory locations
2. Press and release the MEM/ESC button to enter
Scan Button
3. Press and release the Scan button, Scan
Channel Button
The Scan icon will continue to be displayed when
Memory Scan is On.
Your radio will continue to scan memory locations
and stop as an incoming transmission is detected.
Your radio will remain on that stored channel/
privacy code for 6 seconds.
18
programmed already.
Memory mode from Standby mode.
Memory icon and the Memory Location show
on the display.
icon and Memory icon will be displayed
simultaneously and then begin scanning stored
channel locations.
•