To Adjust Volume; Microtalk ® Range - Cobra microTALK MU1500 Owner's Manual

Communicating with Another Person
1. Press and hold the Talk button.
Talk Button
2. With the microphone about two inches (5 cm) from
your mouth, speak in a normal voice.
3. Release the Talk button when you are nished talking
and listen for a response.
Two Inches
You cannot receive incoming calls while pressing the
from Mouth
Talk button.
Both radios must be tuned to the same
channel/privacy code to communicate.
Listening for a Response
Release the Talk button to receive incoming
Listening
transmissions. Your microTALK
Standby mode while the Talk buttons are not pressed.

To Adjust Volume

Press PF2 Button for three seconds to turn off the auto
Volume Knob
squelch, rotating Volume Knob until you reach a
comfortable listening level.
1. Rotate Volume Knob clockwise to increase the
volume.
2. Rotate Volume Knob counterclockwise to decrease
the volume.
Press and hold PF2 Button to enable the auto squelch.
Do not hold the radio close to your ear. If the volume is
set to an uncomfortable level, it could hurt your ear.
6
radio is always in
®
Auto Squelch (Maximum Range extender)
Your microTALK radio will automatically shut off weak transmissions and
®
unwanted noise due to terrain, conditions or if you've reached your Maximum
Range limit.
You can turn off auto squelch (or turn on maximum range extender), allowing
all signals to be received and extending the maximum range of your radio.
To turn maximum range extender on (Turn off auto squelch):
– Press the PF2 button for at least three seconds until you hear two beeps
which indicates the maximum range extender is on.
– Press the PF2 button again to turn on auto squelch.
microTALK ® Range
Your range will vary depending on terrain and conditions.
Maximum Range
In at, open country your radio will operate at maximum
range.
Buildings and foliage in the path of the signal can reduce
the range of the radio.
Reduced Range
Dense foliage and hilly terrain will further reduce the
range of the radio.
Reduced Range
Remember, you can achieve maximum
range by using maximum range extender.
See page 6 for details.
Both radios must be tuned to the same channel to communicate.
See Page 10 for resetting all the channels and privacy code
setting to factory default.
7