BMW R 1200 R 2008 Rider's Manual page 70

If one of the pointers has not
5
been moved, or if one of the
specified warning and indicator
68
lights has not been switched on:
If it was not possible to
switch on the warning
lights, possible malfunctions
cannot be indicated.
Watch all warning and indicator
lights on the display.
z
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
The readiness for operation of
the BMW Motorrad Integral ABS
is checked by the self-diagnosis.
Self-diagnosis is performed au-
tomatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must
drive faster than 3 mph (5 km/h).
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning light flashes.
Possible country-specif-
ic version of ABS warning
light.
Phase 2
Checking wheel sensors while
starting off.
ABS warning light flashes.
Possible country-specif-
OE
ic version of ABS warning
light.
ABS self-diagnosis
completed
The ABS warning light goes
out.
If an ABS fault is indicated after
the ABS self-diagnosis is com-
pleted:
Continue driving is possible. It
must be noted that neither the
ABS nor the integral function is
available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC self-diagnosis
The readiness for operation
of the BMW Motorrad ASC is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch
on the ignition. So that the ASC
self-diagnosis can be completed,
the engine must be running and
the motorcycle must drive at a
speed of at least 3 mph (5 km/h).
OE