Table of Contents
Advertisement
Each time the button is pressed,
the display shows values start-
ing with the current value in the
following order:
Total distance covered
Tripmeter 1 (
Trip I
Tripmeter 2 (
Trip II
Tire pressures (OE)
Warnings if necessary
Resetting tripmeter
Switch on ignition.
Select desired tripmeter.
Press and hold button 2.
Tripmeter is reset.
)
)
Residual range
without onboard computer
The operating range indicates
what distance can still be driven
with the remaining fuel. It is only
displayed after the fuel reserve
is reached. This distance is cal-
culated on the basis of fuel level
and average consumption.
When refueling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. Otherwise neither the
4
OE
45
z
Advertisement
Chapters
Table of Contents
