Table of Contents
Advertisement
8
102
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
z
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove mounting bolts 1 of
brake calipers on left and right.
Press brake pads in brake
caliper 2 apart slightly by
rocking back and forth A in
relation to brake disks 3.
Carefully pull brake calipers
back and out until clear of
brake disks.
with BMW Motorrad Integral
ABS
OE
Unclip ABS line from holders 9.
When pulling off left brake
caliper, make sure that ABS
sensor cable is not damaged.
OA
without center stand
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
(
109)
Raise front of motorcycle until
the front wheel can turn freely.
Advertisement
Chapters
Table of Contents
