BMW R 1200 R 2008 Rider's Manual page 116

8
114
Insert cover 2 while making
sure that lugs 5 of cover en-
gage in corresponding holders.
z
Install lower screw 1.
Replacing brake and tail
light bulb
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Switch off ignition.
Removing seat ( 60)
Remove 3 screws 1.
Remove cover 2.
Remove screw 3.
Pull lamp housing out of hold-
ers 4 toward rear.