2.
Click Commands - Reset PS/2. A message box displays requesting that you confirm the reset.
3.
In the message box, click OK.
a.
A message appears indicating that the mouse and keyboard have been reset.
b.
Click OK to close the message box.
-or-
Click X or press
and keyboard.
Sending a ping request
To send a ping request:
1.
If the OSCAR interface is not open, press
2.
Click Commands to open the Commands dialog box.
3.
Click Network Ping to open the Ping dialog box shown in Figure 3.24.
Figure 3.24: OSCAR Interface Ping Dialog Box
4.
Enter the IP address that you want to ping in the IP Address to ping field, then click Send Ping.
The result will be displayed in the Result box below the Send Ping button. The result will be
one of the following:
•
Ping successful!
•
No response received.
•
Invalid IP address.
to exit without sending a Reset command to the PS/2 mouse
Escape
Print Screen
Chapter 3: Local Port Operation
to open the Main dialog box.
41