Enabling Or Disabling Broadcasting; Enabling Or Disabling Scan Mode; Figure 3.18: Oscar Interface Commands Dialog Box - Avocent DSR Series DSR1010 Installer/User Manual

36 DSR Switch Installer/User Guide

Figure 3.18: OSCAR Interface Commands Dialog Box

Enabling or disabling Broadcasting

To turn Broadcasting on:
1. If the OSCAR interface is not open, press
2. Click Commands to open the Commands dialog box.
3. Select the Broadcast Enable checkbox to activate Broadcasting.
4. From the user station, type the information and perform the mouse movements you wish
to broadcast.
To turn Broadcasting off:
From the Commands dialog box, clear the Broadcast Enable checkbox.

Enabling or disabling Scan mode

To start the Scan mode:
1. If the OSCAR interface is not open, press
2. Click Commands to open the Commands dialog box.
3. Select Scan Enable in the Commands dialog box.
4. Click X to close the Commands dialog box.
NOTE: Scanning will begin as soon as the Scan Enable button is selected.
To cancel Scan mode:
Select a target device if the OSCAR interface is open.
-or-
to open the Main dialog box.
Print Screen
to open the Main dialog box.
Print Screen