Viewing And Disconnecting User Connections; Figure 3.19: Oscar Interface User Status Dialog Box - Avocent DSR Series DSR1010 Installer/User Manual

Move the mouse or press any key on the keyboard if the OSCAR interface is not open. Scanning
will stop at the currently selected target device.
-or-
From the Commands dialog box, deselect the Scan Enable checkbox.

Viewing and disconnecting user connections

You can view and disconnect users through the User Status dialog box. The username (U) will
always be displayed; however, you can display either the target device name or EID number to
which a user is connected. If there is no user currently connected to a channel, the user field will be
blank and the Server Name field will display Free.
To view current user connections:
1. If the OSCAR interface is not open, press
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.19.

Figure 3.19: OSCAR Interface User Status Dialog Box

To disconnect a user:
1. If the OSCAR interface is not open, press
2. Click Commands - User Status to open the User Status dialog box shown in Figure 3.19.
3. Click the letter corresponding to the user to disconnect. The Disconnect dialog box will appear
as shown in Figure 3.20.
Chapter 3: Local Port Operation
to open the Main dialog box.
Print Screen
to open the Main dialog box.
Print Screen
37