AT&T Merlin Plus User Manual page 18

SETTING THE CURRENT
DAY, DATE, AND TIME
4 Dial *6 followed by the new authorized caller code you have chosen.
5 Dial ##.
The two-beep confirmation tone sounds.
6 Enter the new authorized caller code again.
7 Dial # # to confirm the new authorized caller code.
The two-beep confirmation tone sounds.
Continue programming or exit authorized caller mode by dialing * ##.
8
9 To disconnect, dial ##.
Refer to the following instructions to set the current day, date, and time for
the MERLIN Attendant clock.
If you never set the MERLIN Attendant clock or if you lose your
NOTE:
programming due to an extended power failure, the date is set to
01/01/80, the time is set to zero, and the MERLIN Attendant remains
in day mode (day announcement with day routing plan) until the
clock is reset.
1 Select an outside line and dial a telephone number that is answered by
your MERLIN Attendant.
If you are programming from a remote location using a single-line
NOTE:
standard Touch-Tone phone, enter only one pound sign (#) for
every two pound signs ( # # ) that appear in a programming
command.
2
Wait for an answer.
3
Dial * followed immediately with your authorized caller code and # #.
The two-beep confirmation tone sounds.
4
Dial *71 followed by a code for the current day of the week.
5
Dial two digits for the
6
Dial two digits for the
7
Dial two digits for the
8
Dial two digits for the
(00 is midnight).
9
Dial two digits for the
10
Dial two digits for the
1 = Sunday
2 = Monday
3 = Tuesday
4 = Wednesday
5 = Thursday
6 = Friday
7 = Saturday
month (01 through 12).
day (01 through 31).
year (00 through 99).
hour (00 through 23) using 24-hour time
minute (00 through 59).
seconds (00 through 59).
Changing the Current Settings 2-3