Table of Contents
Advertisement
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number
of the remote ProxyServer.
If your Modem Initialization String, Initialization Response, or Connect Response values
are different than the defaults in the dialog box, refer to your modem user documentation
and change the default values to match your modem.
Click OK when you are satisfied with your selections.
6
Run the Proxy Server Configuration program. Click Start | Programs | Proxy Server
2.01 | Proxy Server Configuration, or double click on the Proxy Server Configuration
icon in the Proxy Server 2.01 program group.
7
The Dialing Router dialog box is displayed while software is dialing the remote
ProxyServer.
8
The Reading Setup dialog box is displayed.
9
The Proxy Setup menu is displayed. This is the dialog box of the remote ProxyServer.
Refer to the on-line help provided with your software for a description of each dialog box
and field within a dialog box.
10
After you have changed the configuration of the remote ProxyServer, click Download
Setup to update the configuration. The remote ProxyServer will be brought down, the
new configuration written to the unit, and the unit will reboot.
11
Click Exit when the downloading is complete.
12
The Hangup connection with Router? dialog box is displayed
Click Yes to disconnect the phone connection to the remote site.
13
If the same telephone number is not going to be used again in the immediate future, you
may want to remove it from the Port Setup dialog box.
14
At the remote site, reconnect the ProxyServer to the serial port of the PC and from the
Proxy Server 2.01 program group double click on the Proxy Server Configuration icon
to verify that the ProxyServer is running.
Chapter 5 - Remote Configuration and Management
39
Advertisement
Table of Contents
