Table of Contents
Advertisement
Chapter 4 - ProxyServer Software
Enabling Multi-Link PPP
If you have an optional DCE device connected to WAN 2, the ProxyServer can be configured to
make use of Multi-Link Point-to-Point Protocol (MLPPP). This feature allows the ProxyServer to
bond the WAN ports (56KDSU and RS232/V.35) together and dynamically allocate bandwidth to
LAN users. By this method, a single LAN client could make use of both WAN ports until another
client requires access, at which time the ProxyServer shares the WAN ports between the clients.
To enable MLPPP, click on the Internet button in the Proxy Setup menu. The Internet Setup
dialog box appears.
Click on the Advanced tab and check MultiLink PPP to enable MLPPP on the WAN ports.
Click on the WAN 1 tab and enter a User Name and Password, as agreed upon with your ISP.
Click on the WAN 2 tab and enter the identical User Name and Password.
Note: The User Name and Password must be the same for both WAN 1 and WAN 2 to use
MLPPP.
When you have finished the configuration, click OK. You are returned to the Proxy Setup menu.
Click Download Setup to save the new configuration to the ProxyServer.
31
Advertisement
Table of Contents
