Integrated Directory - Lucent Technologies 302A Quick Reference

DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference 555-230-890
Console Operations
Feature Operation
To place a call on hold, perform the following:
1. While on an active call, press the
To return to a held call, perform the following:
1. Press the call appearance button where the call is held.
2. To end the call, press the

Integrated Directory

The Integrated Directory feature allows you to find user extension numbers listed
in the switch's on-line directory. The directory contains an alphabetical listing of
names and numbers.
NOTE:
This feature is available only when the names are entered via a Property
Management System (PMS) or through switch administration.
The On Hold lamp at the call appearance button goes on.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
The On Hold lamp at the call appearance button goes off.
The call appearance lamp goes on.
The Position Available lamp goes off.
The person who was on hold is reconnected to the console.
The person's name (if available) and extension are displayed.
RELEASE
You are disconnected from the call.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
NOTE:
When the On Hold lamp flashes, it indicates that the hold time has
expired. When this happens, the console also beeps to indicate that a
call needs attention. Press the call appearance button and answer the
call.
button.
HOLD
button.
Issue 3
June 1999
26