Table Of Contents; Configuring Utilization Monitoring - Avaya P580 User Manual Addendum

Configuring Utilization Monitoring

Overview
Part No. 610-0211-094
Utilization monitoring makes it possible for you to monitor
utilization of the:
CPU-the number of packets per second that the CPU on the
supervisor module routes (slow path).
Forwarding engine-the number of packets per second that
the 80-series forwarding engines route. This statistic includes
packets routed by the forwarding engines on 80-series media
modules (FIRE) and on the supervisor module (FORE).
For more information about the slow path and FIRE and FORE
paths, see "Routing Overview" in Chapter 1, "Introduction," of the
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide.
For each of these statistics, you can set a high threshold. If this
threshold is exceeded, the switch logs the event in the event log,
displays a message in the CLI, and sends an SNMP trap to the Trap
receiver.
This section contains procedures for the following tasks:
Enabling Utilization Monitoring
Enabling Event Logging of Utilization
Setting a Utilization Threshold
Viewing Utilization Settings
Viewing CPU Utilization Statistics
Viewing Statistics for Forwarding Engine Utilization
page 21
You can configure utilization monitoring only by using the CLI. This
feature is not available in the Web Agent.
Doc. No. 650-100-701
on page 18
on page 18
on page 19
on page 20
on page 21
December 2, 2002
on
17