Gigabit Uplink Module - Avaya P580 User Manual Addendum

Appendix A: Configuring the Avaya

10-Gigabit Uplink Module

Overview
© 2002 Avaya, Inc.
C H A P T E R 1
This appendix describes how to configure the Avaya 10-Gigabit
Uplink module. See
You can configure the 10-Gigabit module by using the CLI or the
Web Agent.
When you use the CLI to configure the 10-Gigabit module, enter the
the module number in the format of <Slot N>-<Slot N+1>. For
example, to enable the 10-Gigabit port if the module were in slots 5
and 6, you would enter set port enable 5-6/1.
This appendix includes the following topics:
Associating VLANs with 10-Gigabit Ports
Configuring Physical Port Parameters on 10-Gigabit Ports
page A-5
Configuring Switch Port Parameters
NEDR on page A-10
IEDR on page A-11
Figure 8.
Figure 8. 10-Gigabit Uplink Module
December 2, 2002
on page A-2
on page A-10
on
A-1