Table of Contents
Advertisement
21. Remove the two screws and two snap rings, then
remove the return guide assembly.
22. Remove the two helical extension springs and two
snap rings (E3.0), then remove the pinch assembly.
23. Remove the two snap rings (E2.3), then remove the
two bearing fl anges and two bearings.
24. Remove the pinch roller.
UP-CX2
E3.0
BVTT
3 x 6
Return guide assembly
Pinch assembly
Bearing
Bearing
Pinch roller
flange
E2.3
Helical
extension
E3.0
spring
E3.0
Helical
extension
spring
E3.0
Bearing
Bearing
flange
E2.3
1-29 (E)
Advertisement
Table of Contents
