Installing The Bezel Filter - Dell PowerEdge XR12 Installation And Service Manual

Figure 24. Removing the bezel filter for Front Accessed configuration
Next steps
1. Replace the bezel filter.
2. Install the bezel.

Installing the bezel filter

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the bezel.
Steps
1. Place the new filter in the bezel cavity under the filter bracket. Ensure that the filter is smooth and flush in the allowed
cavity.
2. Slide the side latches open to allow the filter to be placed into the bezel. Ensure the filter is square in the allowed cavity and
that the two side latches have closed.
30 Installing and removing system components
Safety instructions.
Before working inside your system.