Alarms - Jacuzzi cloud Use & Maintenance

Alarms

The connection to the alarm circuit must be carried out at the installation stage and in
compliance with the warnings detailed in the installation manual.
When pressed, the button
will illuminate a fixed colour ( BASE and DREAM models).
The buzzer is activated immediately (if the shower enclosure is connected to the alarm
circuit).
When the alarm is activated, the current function or functions (except for those activat-
ed using the brassware and/or the scale removal cycle) will be immediately interrupted;
this will also occur if the shower unit is not connected to the alarm circuit.
whereas in the
If the "Turkish bath" function is active, the function is interrupted and a washing cycle is
carried out, after which the system returns to "stand by" mode.
If no functions are in progress (except for those activated using the brasswear and/or
the scale remover cycle) the
the key again turns off the blue colour, the white colour turns on and all the electronic
functions are enabled.
To stop the alarm, press the
by" mode).
39
starts flashing from blue to white (HOME SPA model), or
In the DREAM model, the Cromodream® function, if active, continues to function
HOME SPA model, it stops and the white light turns on.
key turns on and all the functions are inhibited. Pressing
key (the shower enclosure will switch back to "stand