Line Fuse
Tools Required
small slot screwdriver
Removal
arning
For continued protection against fire hazard, replace fuse only with same type
and rating (3 A 250 V F). The use of other fuses or materials is prohibited.
1. Disconnect the power cord.
2. Use a small slot screwdriver to pry open the fuse holder.
3. eplace the blown fuse with a 3 A 250 V F fuse (HP part number 2110-0708).
Replacement
Simply replace the fuse holder.
14-4 Assembly Replacement and
Post-Repair Procedures
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
RAFT
3/21/106 15:15