Technical Description - Dometic CAM1000 Installation And Operating Manual

CAM 1000 / BSC 01
• The object must move faster than the vehicle.
• The system does not detect any hidden objects.
• The detection of objects in darkness is limited.
• Repeating structures like a construction fence may generate a detection/indication.
• Strong shadows with a behaviour similar to moving objects may generate a detection/indica-
tion.
This product is only suitable for the intended purpose and application in accordance with this
instruction. Any other use, deviating from the intended use, is not allowed! Dometic accepts no
liability for any loss, damage or injury incurred, directly or indirectly due to other as the intended
use.
5

Technical description

5.1 Function description
The camera image is evaluated via the control unit in the camera. Objects moving in the same
direction and faster as the vehicle are detected and marked on the monitor with a movement
arrow. The arrow moves with the detected object and serves as an optical signal. Optionally, an
acoustic warning signal can be added.
The system BVS7 1000 includes the M75LXAHD monitor, which is preferably mounted on the
right A-pillar and provides the driver with images of the situation next to the vehicle.
The CAM1000 / BSC01 camera has the following features:
• CMOS camera with moving object detection function
• Evaluation of the signal edge when the object enters the active area of the image
• Defined active (C) and inactive (D) image area (fig. 5)
• Minimization of messages by exclusion of irrelevant objects (filtering by direction of movement)
• Optical signaling by dynamic arrow indicator
• Acoustic warning signal
• Speed-dependent activation via GPS receiver
• Automatic activation of the monitor
EN
Technical description
7