Password Setting - Intel P31 User Manual

Express chipset and ich chipset based m/b for lga775 quad core ready intel core processor family
Hide thumbs Also See for P31:
Table of Contents

Advertisement

Clock
Auto Detect PCI
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum as Enable or Disabled.
Linear PCIE X Clock
The item allows you to set linear PCIEx clock from a minimum of 100MHz to a maximum of
200MHz.
Host/PCI Clock at Next Boot
This item allows you to select the CPU/PCI Clock.
DRAM Clock at Next Boot
This item allows you to set DRAM clock .
CPU Vcore Select
This item allows you to set the voltage of CPU .
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage .
NB Voltage
This item allows you to select value of Voltage for North Bridge Chipset.
SB Voltage
This item allows you to select value of Voltage for South Bridge Chipset.
VDIMM Voltage
This item allows you to set the voltage of DRAM DIMM from a minimum of 1.73V to a
maximum of 2.74V by 16 stages.
FSB Voltage
This item allows you to change FSB voltage by 2%; the settings are from -6% to +24%.

3-12 Password Setting

You can set either supervisor or user password, or both of them. The differences are:
Supervisor password:
User password:
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password typed
now will clear any previously entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press <Enter>. You may also press <Esc>
to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A
message will confirm that the password will be disabled. Once the password is disabled, the
system will boot and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to enter
Setup. This prevents an unauthorized person from changing any part of your system
configuration.
Additionally, when a password is enabled, you can also require the BIOS to request a password
every time your system is rebooted. This would prevent unauthorized use of your computer.
Can enter and change the options of the setup menus.
Can only enter but do not have the right to change the options of the
setup menus. When you select this function, the following message
will appear at the center of the screen to assist you in creating a
password.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw82801gb

Table of Contents