Lga 775 Cpu Installation Guide - Intel P31 User Manual

Express chipset and ich chipset based m/b for lga775 quad core ready intel core processor family

Hide thumbs Also See for P31:

Table of Contents

2-3-3

LGA 775 CPU Installation Guide

Socket Preparation

1. Opening the socket:

Note: Apply pressure to the corner with right hand thumb while opening/closing the load lever,

otherwise lever can bounce back like a "mouse trap" and WILL cause bent contacts (when

loaded)

Socket Load

Plate Open

2. Remove PnP Cap (Pick & Place Cap)

i. With left hand index finger and thumb to support the load plate edge, engage PnP cap with right

hand thumb and peel the cap from LGA775 Socket while pressing on center of PnP cap to assist in

removal.

ii. Set PnP cap aside. Always put PnP cap back on if the processor is removed from the socket.

iii. Visually inspect PnP cap for damage. If damage observed, replace the PnP cap.

ii.

iii.

Socket Load

Lever Open

Note: After PnP cap removal, make sure socket load

plate and contacts are free of foreign material; Refer to

Overview Module for FM cleaning.

Note: Optionally, remove PnP cap after CPU insertion.

This will compromise the ability to visually inspect

socket.

Disengage Load Lever by depressing down and

out on the hook to clear retention tab

Rotate Load Lever to fully open position at

approximately 135degrees

Rotate Load Plate to fully open position at

approximately 100degrees

Table of Contents

Fw82801gb