Pc Health Status; Miscelaneous Control - Intel P31 User Manual

3-10 PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
Shutdown Temperature
Show PC Health in POST
> Smart FAN Configurations
VCC3v
Vcore
NB1.25V
+5V
+12V
5VSB
VDIMM
3VSB
Vbat
CPU Temperature
System Temperature
CPUFAN Speed
SYSFAN1 Speed
SYSFAN2 Speed
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
CPU Temperature/ System Temperature/CPU FAN Speed, SYS FAN1, SYSFAN2
Speed/VCC 3V/Vcore/ NB1.25V/+5V/+12V/5VSB(V)/VDIMM/3VSB/Vbat
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
CPU Clock Ratio
Auto Detect PCI Clock
Spread Spectrum
Linear PCIEX Clock
** Current Host/PCI Clock is 200/33MHZ**
Host/PCI Clock at Next Boot
** Current DRAM CLOCK
DRAM Clock at Next Boot
CPU Vcore Select
CPU Vcore 7-Shift
NB Voltage
SB Voltage
VDIMM Voltage
FSB Voltage
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU Clock Ratio
The settings are : 6X, 7X, 8X, 9X and 10 X.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Disabled
Enabled
Press Enter
3.31V
1.28V
1.26V
5.12V
11.88V
5.00V
1.87V
3.37V
3.28V
64 ° C147 ° F
38 ° C/96 ° F
2912RPM
5836 RPM
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
10X
Disabled
Disabled
100MHz
200/33MHZ
667 MHz **
Auto/800MHz
Default(1.32500v)
Normal
1.25v(Default)
1.50v(Default)
1.87V(Default)
Default
0 RPM
F7:Standard Defaults
40
Item Help
Menu Level >
Item Help
Menu Level >