3.3. Toolbar
Connect: Connect device, read data and allow write command.
Disconnect: Disconnect device, stop data reading and disallow write command.
Start Data Logging: Record data at the set logging interval.
Stop Data Logging: Stop recording.
Add Device: Add a new device that is going to be connected.
Delete Current Device: Delete current active device. If multiple windows are tiled,
it deletes the device of the top window.
Connection Manager: Manage connections and edit connection parameters.
Data log Settings: Check and set data logging parameters of each device that is
going to be monitored.
Options: Check and set some of the advanced options.
Device Manager: Show the detailed communication status.
Device Properties: Modify device description while connected; modify device
address while disconnected.
Connection Settings: Modify the connection settings of current active device.
Text Size: Set text size of data area.
Tile Horizontally: Rearrange all windows in the tile horizontally.
Tile Vertically: Rearrange all windows in the tile vertically.
Cascade: Rearrange all windows in a cascade.
Minimize All: Minimize all windows.
Explorer Bar: Show or hide the explorer bar.
Help: Display help document.
8