Functions; Basic Monitoring; Device Management - Eaton Power Xpert 1000 User Manual

4. Functions

4.1. Basic Monitoring

4.1.1. Add new connection. Refer to the
4.1.2. Set connection parameters. Refer to the
4.1.3. Add device window. Refer to the
4.1.4. Connect. Refer to the
4.1.5. Click the node in menu tree on the left side to view the measured values. The
content displayed in the device window may be different according to different
device types.
4.1.6. Click Disconnect menu or icon to stop.

4.2. Device Management

4.2.1. Add a new device. Refer to the
4.2.2. If there is an unused device window, select it and click Device Properties menu
or icon to make the device status 'available'.
4.2.3. If a window is no longer needed, click Delete Current Device menu or icon.
4.2.4. Device Manager
1) Click Settings > Device Manager.
or
2) Click the icon
The Device Manager box is shown as Figure 4.3.
New Connection
Add New Device
Connection section.
Add New Device
.
9
section.
Connection Settings section.
section.
section.