2. Getting Started
2.1. New Connection
A connection is required before communicating with the meter. To add a new
connection, do one of the following:
1) Click Settings > Connection Manager.
or
2) Click the icon
The Connection Manager is shown as Figure 2.1.
New: Add a new connection.
Delete: Delete the selected connection.
Edit: Edit the selected connection settings.
Close: Close the window.
Status: 'Available' means Com Port or Ethernet is active, and 'Not Available'
means Com Port or Ethernet is inactive. If the status is blank, it means that Com
Port or Ethernet has not been established.
2.2. Connection Settings
Set the connection parameters. The New Connection box is shown as Figure 2.2.
.
Figure 2.1. Connection Manager
3