Connection; Getting Help - Eaton Power Xpert 1000 User Manual

2.4. Connection

You can read all the measurement data after you successfully complete Step 3. To
connect, do one of the following:
1) Click Operation > Connect.
or
2) Click the icon
or
3) Press F9 on keyboard.
Notice: If you cannot start communication normally, please make sure the physical
connection of the device is correct and the communication setting parameters are
properly configured.

2.5. Getting Help

For more information, do one of the following:
1) Click Help > Help.
or
2) Click the icon
.
.
5