Device List: Displays all available devices. Every listed item displays its detailed
communication status.
Device Total: The total number of devices.
Com Normal Total: The total number of devices which communicate normally.
Com Failure Total: The total number of devices which fail the communication.
Log Enabled Total: The total number of devices whose real-time data logging state
is enabled.
Log Failure Total: The total number of devices whose real-time data logging state
fail last time.
Reset Counters: Reset the communication counter for all devices.
Properties: Modify the properties of selected device in device list. Double-click the
selected item can also modify device properties.
Select Window: Activate the corresponding window of selected item in device list.
Close: Close the dialog.
4.3. Data Logging
4.3.1.
Data Logging Settings
You must set data log before you use this function. To set it, do one of the following:
1) Click Settings > Data Log Settings.
or
2) Click the icon
Figure 4.3. Device Manager
.
10