BASIC FUNCTIONS
HOW TO ANSWER CALLS
1
When the phone rings or the LED blinks, press
any key except Volume up or down, or [
2
To end the call, press [
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (refer to page 30)
CALLER ID FUNCTION
When there is an incoming call, the caller's phone number is
displayed on the screen.
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
This function notifies you of an incoming call when you are on
the another call.
l
To answer the call, press [
l
To switch back to the first caller, press [
[18]
].
].
] when you hear the beep.
] again.
BASIC FUNCTIONS
MISSED CALL DISPLAY
1
Displays the number of missed
calls and the time the call was
missed.
l
The message will be cleared
when you press the [
[
] key.
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
1
Adjust volume by using the volume control keys
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
l
Call status in hands-free : Hands-free
volume adjustment. Press [
when the phone rings and it will mute the
ringer.
VIBRATE
This function disables the ringer and vibrates the phone to alert
you of an incoming call. To enable this function, press [
[3],[1] and select VIBRATE or press [
"down" keys at the upper left side of the phone.
MISSED 1 CALLS
9:21pm
PREV
] or
adjustment.
]
],
] then the "up" and
[19]