How To Answer Calls; Auto Answer; Caller Id Function; Call Waiting Function - Audiovox PCX-1100XL User Manual

BASIC FUNCTIONS

HOW TO ANSWER CALLS

When phone rings or LED blinks press any key
1
except Volume or [
To end the call, press [
2

AUTO ANSWER

This function allows an incoming.
To enable this function press [ ],[5],[2].
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 34)

CALLER ID FUNCTION

When there is an incoming call, the
caller's phone number is displayed
on the screen.
The Caller ID number is saved in the call log.

CALL WAITING FUNCTION

This function notifies you there is an incoming call when you
are on the phone.
l
To answer the call, press [ ] when you hear the beep.
l
To switch back to the first caller, press [
[18]
].
].
] again.
BASIC FUNCTIONS

MISSED CALL DISPLAY

Displays the number of missed
1
calls and the time the call was
missed.
l
The message will
cleared when you press
the [ ] key or [

HOW TO ADJUST VOLUME

You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
Adjust volume by using the volume control keys
1
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
adjustment.
l
Call status in hands-free : Hands-free volume
adjustment. Press [
rings and it will mute the ringer.

VIBRATE

This function disables the ringer and vibrates the phone any time
an incoming call is in process. To enable this function press [
[5],[7] and select VIBRATE or by pressing the "up"and "down"keys
at the left upper side of the phone.
MISSED
XX CALLS
PM XX:XX
PREV
be
].
] when the phone
],
[19]