MCI3300-02/10 00.8.22 5:32 PM 페이지17
BASIC OPERATION
How to Make a Call
Enter the phone number.
1
To delete a wrong number, press [CLR] to
back up. To delete all entered digits, press
[END] or hold down [CLR].
Press
.
2
•If the line is busy, terminate the call, wait
for a moment, then try again.
•T he " Call Failed" message will appear on
the screen if the call cannot be connected.
Start the conversation after the call
3
is connected.
To end the call, close the phone or
4
press
. If you are using the
ear-microphone, press the ear-
microphone button shortly.
•To dial the number you have just called, press [
If you are using the ear-microphone, press the ear-microphone button for more than
2 second.
•If
is displayed, you are in an out-of-service area and cannot make a call.
1 8
BASIC OPERATION
Area
P h o n e
Code
N u m b e r
How to Answer a Call
1
213-
555-5262
2
Calling...
213-555-5262
00:00:01
3
213-
555-5262
4
MCI WORLDCOM
Jan 20, Wed
4:03pm
•If Auto Answering Feature is enabled, the call will be answered after the preset number
] .
of rings. (refer to p 25)
Phone rings and the green and red
LED on the folder cover flash.
To change receiver type
•
(Ringer/Vibration/Ringer + Vibration/Lamp),
please refer to p 22. Initial setting is "R i n g e r" .
Open the folder or if the folder is
already open, press any key. except
[
]key. If you are using ear-
microphone, press the ear-microphone
button for more than 2 seconds.
If you press button once in short, the
bell sound will stop, twice in short, the
function will be some on End
Start the conversation.
•
Closing the folder while using the ear-microphone
does NOT end the call.
To end the call, close the folder or
press
.
2
Incoming
Call
00:00:01
1 9