mmp1020(5/14)-6/21
2001.6.21
6:23 PM
BASIC FUNCTIONS
HOW TO ANSWER CALLS
When the phone rings or the LED blinks, press any
1
key except Volume up, Volume down or [
To end the call, press [
2
AUTO ANSWER
This function allows an incoming call to automatically be
answered after a set number of rings.
To enable this function, press [
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 37)
CALLER ID FUNCTION
When there is an incoming call, the
caller's phone number is displayed
on the screen.
The Caller ID number is
saved in the call log.
CALL WAITING FUNCTION
This function notifies you there is an incoming call when you
are on the phone.
l
To answer the call, press [
] when you hear the beep.
l
To switch back to the first caller, press [
[18]
Page 24
MISSED CALL DISPLAY
1
].
].
HOW TO ADJUST VOLUME
], [4], [2].
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
1
VIBRATE
This function disables the ringer and vibrates the phone to alert
] again.
you of an incoming call. To enable this function, press [
[5],[1] and select VIBRATE by pressing the "up" and "down"
keys at the upper left side of the phone".
BASIC FUNCTIONS
Displays the number of missed
MISSED XX CALLS
calls and the time the call was
XX:XX PM
missed.
l
The message will
be
cleared when you press
the [
] or [
]key.
Adjust volume by using the volume control keys
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
adjustment.
l
Call Status in Hands-Free : Hands-free vol-
ume adjustment. Press [
] when the
phone rings and it will mute the ringer.
],
PREV
[19]