MMD-1010(audiovox)11/28
2000.11.28
BASIC FUNCTIONS
HOW TO ANSWER CALLS
When phone rings or LED blinks, press any key
1
except Volume Up or Down and [
To end the call, press [
2
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 33)
CALLER ID FUNCTION
When there is an incoming call, the caller's phone number is
displayed on the screen.
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
This function notifies you there is an incoming
1
call when you are on the phone.
l
To answer the call, press [
when you hear the beep.
l
To switch back to the first caller,
press [
] again.
[18]
5:50 PM
Page 24
MISSED CALL DISPLAY
1
] key.
].
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
1
VIBRATE
]
BASIC FUNCTIONS
Displays the number of missed
calls.
l
The message will
be
cleared when you press
the [
] or [
] key.
Adjust volume by using the volume control keys
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
adjustment.
l
Call status in hands-free : Hands-free volume
adjustment. Press [
] when the phone
rings and it will mute the ringer.
This function disables the ringer and vibrates the phone any
time an incoming call is in process. To enable this function
press [
], [3],[1] and select VIBRATE or by pressing the
"up"and "down"keys at the left upper side of the phone.
MISSED
XX CALLS
PREV
[19]