Table of Contents
Advertisement
TX-20B USER MANUAL06/28 01.6.28 12:20 PM 페이지26
BASIC FUNCTIONS
HOW TO ANSWER CALLS
1
When the phone rings or LED blinks, press any
key except Volume up or down, or [
2
To end the call, press [
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (refer to page 30)
CALLER ID FUNCTION
When there is an incoming call, the
caller's phone number is displayed
on the screen.
The Caller ID number is sa ved in the call log .
CALL WAITING FUNCTION
This function notifies you of an incoming call when you are on
the another call.
l
To answer the call, press [
] when you hear the beep.
l
To switch back to the first caller, press [
[18]
MISSED CALL DISPLAY
1
]
].
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset or by using the menu.
1
VIBRATE
This function disables the ringer and vibrates the phone to
alert you of an incoming call. To enable this function,
press [
then the "up"and"down" keys at the left side of the phone.
] again.
BASIC FUNCTIONS
Displays the number of missed
MISSED 1 CALLS
calls and the time the call was
missed.
l
The message will be cleared
when you press the [
] or
[
] key.
Adjust volume by using the volume control keys
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
adjustment.
l
Call status in hands-free : Hands-free
volume adjustment. Press [
]
when the phone rings and it will mute the
ringer.
], [3],[1] and select VIBRATOR or press [
9:21pm
PREV
]
[19]
Advertisement
Table of Contents
