Important - Be Sure To Read This Section For Safe Use Of The Equipment - Olympus SZ-ADD Instructions Manual

IMPORTANT
The transmitted illumination attachment enables transmitted light observation when it is placed under
the SZ2-ST standard stand for the SZ2 series microscopes.
SAFETY PRECAUTIONS
1. If water is split on the unit, promptly set the main switch to "
2. The lamp housing becomes very hot during operation. When installing it, reserve enough spaces (more than 10 cm)
around it, particularly above it.
3. If the power cord comes in contact with the lamp housing or surrounding equipment, the cord may melt and result in
shock hazard. To prevent this, distribute the power cord apart from the lamp housing.
4. Before replacing the lamp bulb of the light source, set the main switch to "
wall outlet and allow the lamp housing and old bulb to cool down.
LSGA
U-LH100L-3
SZ2-LGB
5. Always use the power cord provided by Olympus. If the proper power cord is not used, product safety performance
cannot be warranted.
6. Always ensure that the grounding terminals are properly connected. If the equipment is not grounded, Olympus can no
longer warrant the electrical safety performance of the equipment.
7. Never allow a metallic object enter the air vents of the unit as this could result in electrical shock or malfunction.
8. The illumination light may be pointed downward with certain mirror angles. As this makes the desktop surface hot, do not
place an object that is vulnerable to heat or easily flammable below the transmitted light illumination attachment.
Safety Symbols
The following symbols are found on the unit. Study the meaning of the symbols and always use the equipment in the
safest possible manner.
Symbol
1
Illumination System
6V15WHAL (PHILIPS 13528), average life 500 hours
12V100WHAL-L (PHILIPS 7724), average life 2000 hours
12V22WHAL (PHILIPS JCR12V22WA/3), average life 100 hours
Indicates that the surface becomes hot, and should not be touched with bare hands.
Before use, carefully read the instruction manual. Improper use could result in personal injury to
the user and/or damage to the equipment.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
" (OFF) and wipe with a dry cloth.
" (OFF), disconnect the power cord from the
Lamp Bulb Specifications
Explanation