Audio Technica ATW-3110 Installation And Operation Manual page 7

UniPak Transmitter Functions
Function Menu
(Transmitter powers-up at Frequency)
LM Frequency
LM RF Power
LM Audio Input Level
LM Power/Mute Locks
LM Input Select
LM Reset to Defaults
LM Quit (exit Menu)
** Continue in the same Up/Down direction and choices "wrap around" to the other end of the range.
† Band C: 541.500 MHz; Band D: 655.500 MHz.
Table 2. UniPak Transmitter Functions
Handheld Transmitter Functions
Function Menu
(Transmitter powers-up at Frequency)
LM Frequency
LM RF Power
LM Audio Input Level
LM Power/Mute Locks
LM Reset to Defaults
LM Quit (exit Menu)
** Continue in the same Up/Down direction and choices "wrap around" to the other end of the range.
† Band C: 541.500 MHz; Band D: 655.500 MHz.
Table 3. Handheld Transmitter Functions
See pages 16-17 for illustrations.
Transmitter Controls And Functions
Default Setting Choices (Edit) LM
Lowest in band 200 discrete frequencies
†
RF LOW RF LOW
+6 dB –6 dB
NO.LOC NO.LOC
MIC MIC
PRESET LOAD
QUIT Press Set to exit
Default Setting Choices (Edit) LM
Lowest in band † 200 discrete frequencies
RF LOW RF LOW
+6 dB –6 dB
NO.LOC NO.LOC
PRESET LOAD
QUIT Press Set to exit
(Continued)
RF HI
0 dB +6 dB +12 dB
ALL.LOC MUT.LOC
INSTR
(b) hold until: DEF (c) hold until: LOADED
RF HI
0 dB +6 dB +12 dB
ALL.LOC MUT.LOC
(b) hold until: DEF (c) hold until: LOADED
Wrap-around**
PWR.LOC
Wrap-around**
PWR.LOC
Yes
Yes
No
Yes
Yes
--
--
Yes
Yes
No
Yes
--
--
7