Table of Contents
Advertisement
12
CRX160E User's Guide
Installing Your CRX160E
This chapter describes the installation procedures for
installing the CRX160E in a PC.
Requirements
®
•
Pentium
II/400Mhz or faster PC Computer.
•
At least 32 MB RAM.
®
•
Windows
95, Windows 98, Windows 2000, or Windows
®
NT
4.0, service pack 4 or later.
•
Bus mastering EIDE connection.
•
Hard disk drive with less than 12ms access time and
sustained throughput greater than 2 MB per second.
•
Latest bus mastering drivers for your IDE hard
drive/CD-ROM source drives.
Installation Instructions
1. Unpack all essential materials and verify that all items
are present. A list of items is in the Quick Start guide.
2. Save your work, and shut down your PC.
3. Remove any accessories and cables, including the
power cable.
CRX160E User's Guide
Chapter 3
13
Advertisement
Table of Contents
