Sony SPRESSA Professional CD-ReWritable User Manual page 14

8. Attach the IDE cable.
Attach the EIDE cable so that the red line that signifies
Pin 1 of the cable is aligned with Pin 1 on the CRX160E.
Although the cables that Sony includes with the unit
are keyed so that they may only be installed properly,
other cables may not be keyed the same. If you use
your existing cable, please be sure to align it properly.
The red line side of the cable goes to the set of pins
closest to the power connector on the CRX160E.
9. Attach the DC power cable.
Plug your standard power connection to the CRX160E.
20 CRX160E User's Guide
10. Connect the audio cable.
If you have a sound card, you can attach the audio
cable to the audio out connectors.
11. Power up the system and install the CD-recording
software that came with your drive.
12. Restart the system.
If there are any difficulties in completing the operations
outlined in this manual, please see the troubleshooting
guide in Chapter 5. You may also contact Technical Support.
CRX160E User's Guide 21