Puk Codes; Security Code - Nokia NPM-8 User Manual

3590 FCC draft.book Page 83 Thursday, February 14, 2002 2:36 PM
3 Enter the current PIN code and press OK.
4 Enter the new PIN code and press OK.
5 Enter the new PIN code again to verify, and press OK.
Note: If you make a mistake while entering the code, Code Error
appears. Start again at step 2 and be careful to enter the correct
code. If you enter the wrong code three times in a row, the PIN code
is blocked. To unblock the PIN code, you need a Personal Unblocking
Key (PUK) from your service provider.

• PUK CODES

The PUK (Personal Unblocking Key) and PUK2 codes are 4- to 8-digit
codes that also usually come from your service provider along with the
SIM card. The PUK code unblocks a blocked PIN code, and the PUK2 code
unblocks a blocked PIN2 code.
If you block your phone, you may need to contact your service provider.
When you enter the PUK code given by your service provider, the phone
will ask you to enter and then confirm a new PIN code.

• SECURITY CODE

Note: The default security code is 12345.
You need the security code to access certain phone features. When the
phone requires the security code, it displays Security code:
Enter the code then press OK.
If you enter an incorrect security code five times in a row, the phone will
not accept the correct code for 5 minutes.
Change the security code
1 Press Menu 4 7 6 (Settings > Security settings > Change access codes).
2 Scroll to Change security code and press Select.
[ 83 ]
13