Installing The Multipurpose Blade Or Dough Blade - KitchenAid 5KFP1318 Series Use & Care Manual

PRODUCT ASSEMBLY
NOTE: For ease of assembly, install the desired Blade or Disc before attaching the Work
Bowl Cover.
5
To attach the Work Bowl Cover, hook the
Lid Hinge into the Handle Hinge on the
Work Bowl and close the Cover.
NOTE: Your Food Processor will not operate unless the Work Bowl Cover is fully closed,
the large Food Pusher is in place, and the Work Bowl is properly seated on the Base.

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

1
Install the Lower Drive Adapter onto the
Upper Drive Adapter. Place the Blade on
the Drive Adapter. Rotate the Blade so it
falls down to the Base of the Adapter.
6
Once the Work Bowl Cover is closed, the
Lid Latch will lock in position.
2
Install the Work Bowl Cover, and be sure
the Lid Latch is pushed down to the
locked position.
9