Product Assembly - KitchenAid 5KFP1318 Series Use & Care Manual

PRODUCT ASSEMBLY

Before first use
Before using your Food Processor for the first time, wash all parts and accessories either
by hand or in the dishwasher (see "Care and Cleaning" section).
NOTE: Your Food Processor is designed so that all accessories may be stored inside the
Work Bowl.
1
Lift up the Lid Latch to unlock the Cover.
Tilt the Work Bowl Cover back and lift it
straight up so that the Lid Hinge pulls out
of the Handle Hinge.
IMPORTANT: Place the Food Processor on a dry, level countertop with the controls
facing forward. Do not plug in the Food Processor until it is completely assembled.
3
Place the Work Bowl on the Base, aligning
the Handle with the raised button on the
right side of the Base. The bowl will click
into place and should be flush against the
Base when properly aligned.
8
2
Remove all parts and accessories from
the Work Bowl, and lift the Food Pusher
out of the Feed Tube.
4
Place the Drive Adapter in the Work
Bowl, lowering it onto the Drive Pin.