Installing The Multipurpose Blade Or Dough Blade - KitchenAid 5KFP0919A Manual

USING THE FOOD PROCESSOR
NOTE: For ease of assembly, install the desired blade or disc before attaching
the work bowl cover.
To attach the work bowl cover, hook
3
the lid hinge into the handle hinge on
the work bowl and close the cover.

INSTALLING THE MULTIPURPOSE BLADE OR DOUGH BLADE

Place the blade on the drive adapter.
1
Rotate the blade so it falls down to
the base of the adapter.
8 | USING THE FOOD PROCESSOR
W11279641C.indd 8
Once the work bowl cover is closed,
4
push the lid hinge down into the
locked position.
NOTE: Your Food Processor will not
operate unless the work bowl cover is
fully closed and the work bowl is properly
seated on the base.
Install the work bowl cover, and be
2
sure the lid latch is pushed down to
the locked position.
10/18/2018 2:11:18 PM