Connecting Power Cable - Konica Minolta REGIUS 110 HQ Installation Manual

2.7

Connecting Power Cable

Connect the power cable that comes with the machine.
Eliminate the clearance between the cable and the floor or wall to avoid hazards to people
walking over it.
Caution
Otherwise, someone may trip over, resulting in injury or damage to the cable or machine.
Back of the second front side
This is the final step in the process of connecting power cable.
1
Check that the power breaker is turned OFF.
If the power breaker is ON, turn it OFF.
2
Connect to power cable to the power supply port.
3
Plug the power cable into the wall outlet (3P) in
the facility.
4
Fix the power cable as required by the conditions
at the installation location.
2-24

2.7 Connecting Power Cable