Omron DeviceNet CV Series Operation Manual page 126

Transistor Remote I/O Terminals with Connectors
Slave
DRT1-MD32ML G79-M50-25-D1 (50 cm)
G79-M75-50-D1 (75 cm)
DRT1-ID32ML-1 G79-I50-25-D2 (50 cm)
G79-I75-50-D2 (75 cm)
DRT1-OD32ML-1 G79-O50-25-D1 (50 cm)
G79-O75-50-D1 (75 cm)
G79-I50-25-D1 (50 cm)
G79-I75-50-D1 (75 cm)
DRT1-MD32ML-1 G79-M50-25-D2 (50 cm)
G79-M75-50-D2 (75 cm)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
MIL Cable I/O Relay Block or other I/O
Inputs: G7TC-ID16/IA16
Outputs: G7TC-OC08/OC16
G70A-ZIM16-5
G70A-ZOC16-4
G70D-SOC16-1
G7TC-OC16-4
M7F
Inputs: G70A-ZIM16-5
Outputs: G70A-ZOC16-4
The following cables are also available with a MIL connector on the Remote I/
O Terminal end and loose wires on the other end.
MIL Cable
G79-A200C-D1 (2 m)
G79-A500C-D1 (5 m)
G79-Y100C-D1 (1 m)
G79-Y200C-D1 (2 m)
G79-Y500C-D1 (5 m)
The MIL pin numbers, loose wire colors, dot markings, and dot colors are
listed in the following table.
Pin Core Dot
No. color marking
■
1 Light
brown
2
3 Yellow
4
5 Light
green
6
7 Gray
8
9 White
10
■ ■
11 Light
brown
12
13 Yellow
14
15 Light
green
16
17 Gray
18
19 White
20
Terminal
I/O are distinguished by color.
Input tube color: Red
G70D-SOC16/VSOC16
Output tube color: Yellow
G70A-ZOC16-3
---
---
---
I/O are distinguished by color.
Input tube color: Red
G70D-SOC16-1
Output tube color: Yellow
Remarks
Loose wire size: AWG28
Loose wires are cut.
Forked terminals are attached to the loose wires.
Forked terminals: 161071-M2 (Nippon Terminal)
Dot color Pin Core
No. color
Black 21 Light
brown
Red 22
Black 23 Yellow
Red 24
Black 25 Light
green
Red 26
Black 27 Gray
Red 28
Black 29 White
Red 30
Black 31 Light
brown
Red 32
Black 33 Yellow
Red 34
Black 35 Light
green
Red 36
Black 37 Gray
Red 38
Black 39 White
Red 40
Section 4-5
Remarks
Dot Dot color
marking
■ ■ ■
Black
Red
Black
Red
Black
Red
Black
Red
Black
Red
■ ■ ■ ■
Black
Red
Black
Red
Black
Red
Black
Red
Black
Red
109